Driveway & Concrete Sealing
Clear or coloured sealers that protect driveways, walkways and patios from water, salt and staining — and keep exposed aggregate and stamped concrete looking as intended.
07 · Protection- Unsealed or weathered driveways
- Salt and de-icer damage at entrances
- Oil and rust staining
- Faded exposed aggregate or stamped concrete
- Freeze-thaw surface scaling
Penetrating or film-forming, matched to the surface.
Silane/siloxane sealers that soak in and repel water without changing the look or adding slip risk.
Clear or coloured surface coatings for a wet-look or enhanced finish on stamped and exposed-aggregate concrete.
Crack filling and scaling repair before sealing so defects are not locked in.
- 01Clean and assess
Pressure washing, stain removal and a check for scaling or cracking.
- 02Repair
Cracks and surface defects addressed before any sealer.
- 03Apply
Sealer applied at the coverage the surface porosity calls for.
- 04Cure
Foot traffic typically the same day; vehicles after the specified cure.
Driveways, walkways, patios, exposed aggregate, stamped concrete.
Proper surface preparation — typically mechanical grinding — is what allows a coating to bond. Skipping it is the most common reason coatings fail early.
No. Some cracks are better addressed by surface repair, coatings or membranes, and some indicate a condition that needs a different approach. Injection is one tool, chosen when it fits.
Start with the concrete.
Fix it properly.
Tell us what you’re seeing and where. We’ll assess the condition on site and recommend the system that fits — or tell you if a different approach is the right one.